Case Center

Microcomputer-controlled electronic universal testing machine

The microcomputer-controlled electronic universal testing machine, equipped with a waterproof membrane tensile fixture, can complete the tensile test of asphalt-based waterproof membrane samples. Equipped with broadband fixtures, tensile tests of textile samples can be completed. The lever fixture can be configured to complete tensile tests on specimens such as rubber and plastic sheets. It can also be equipped with fully automatic extensometers, large deformation devices, etc. to meet the standard requirements of different test methods.

Plastic pendulum impact testing machine

The plastic pendulum impact testing machine is a testing instrument for inspecting the impact resistance performance of non-metallic materials such as plastics, nylon, rubber, wood, fiberglass reinforced plastics, composite plastic pipes, and electrical insulating materials under dynamic loads in low-temperature or normal-temperature environments. This machine can be classified into two types according to the display mode: liquid crystal type and microcomputer type. This machine is easy to operate and has a high working efficiency. It can be used for simply supported beam tests, cantilever beam tests and tensile impact tests. The adjustment and replacement of the supports are convenient, and it has strong applicability.

Plastic drop weight impact testing machine

The plastic drop weight impact testing machine is mainly a device used to test the impact resistance performance of various non-metallic pipes or plates. The method involves using a hammer of a certain mass and shape to strike the sample at a specified position from a certain height, and then judging the impact resistance of the sample based on the test results obtained after the impact.

Heat distortion Vicat softening temperature tester

The instrument integrates Vicat softening temperature (VST) and heat distortion temperature (HDT) testing functions, and is suitable for thermoplastics. It features multiple protection mechanisms, including over-temperature protection, safety doors, overflow protection, and lifting overload protection, etc. In addition, the instrument can be optionally equipped with a fast heat distortion Vicat softening temperature tester, which is used to determine the heat distortion temperature of plastics and polymer materials under specific loads. The modular quick-release sample holder, in combination with the CNAS traceable metrology interface, ensures that equipment maintenance and calibration comply with the requirements of the GB/T27025 standard.

Pipe hydrostatic testing machine

The pipe hydrostatic testing machine is mainly used to determine the pressure resistance time and instantaneous burst pressure of thermoplastic pipes, aluminum-plastic composite pressure pipes, etc. at a constant temperature.