Case Center

Microcomputer-controlled electronic universal testing machine

The microcomputer-controlled electronic universal testing machine is mainly used for the mechanical property testing, analysis and research of metal materials such as tensile, compressive and bending tests.

Microcomputer-controlled electro-hydraulic servo universal testing machine

The microcomputer-controlled electro-hydraulic servo universal testing machine is mainly used for tensile, compressive, bending and shearing tests of metal materials. With the corresponding fixtures, it can also be used for tensile, compressive, bending, shearing and flexural tests of other types of specimens.

Microcomputer-controlled electronic universal testing machine

The microcomputer-controlled electronic universal testing machine can perform compression tests when equipped with different compression fixtures.

Microcomputer-controlled electronic universal testing machine

The microcomputer-controlled electronic universal testing machine can perform bending tests when equipped with different bending fixtures.

Microcomputer-controlled electronic torsion testing machine

The microcomputer-controlled electronic torsion testing machine is suitable for torsion performance tests of metal materials, non-metal materials, composite material bolts and components.

Metal pendulum impact testing machine

The metal pendulum impact testing machine is an instrument used to test the impact resistance of metal materials under dynamic loads. It can continuously and in large quantities conduct metal impact tests.

Plastic pendulum impact testing machine

The plastic pendulum impact testing machine is an instrument used to test the impact resistance of non-metallic materials such as plastics, nylon, hard rubber, and electrical insulating materials under dynamic loads.

Ejection drop weight impact testing machine

The catapulting drop weight impact testing machine is mainly a testing device for conducting impact resistance performance tests on various metal and non-metal pipes and plates (including various non-metal materials such as plastics, ceramics, nylon, building materials, etc.).

Electro-hydraulic servo fatigue testing machine

The electro-hydraulic servo fatigue testing machine is mainly used to test the dynamic characteristics of metals, non-metals, composite materials and structural parts, and can achieve waveforms such as sine waves, triangular waves and square waves. By configuring different fixtures, mechanical tests such as tension, compression and tension compression can be conducted. Environmental test devices can also be configured additionally to complete environmental simulation tests under high temperature, low temperature, salt spray and corrosion conditions.