-
Servo hydraulic dynamic testing machine
Servohydraulic, table-top, 5kN~25kN
HDT Series
It is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used for the static and dynamic mechanical property testing of various alloy materials, engineering plastics, composite materials, elastomer materials, biomaterials, food and packaging, textile materials, and medical devices.
Consult Now
Download
Main usesStandardsFeaturesTechnical ParameterOptional AccessoriesProduct RecommendationMain usesIt is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used for the static and dynamic mechanical property testing of various alloy materials, engineering plastics, composite materials, elastomer materials, biomaterials, food and packaging, textile materials, and medical devices. It can measure the fatigue life, K1c, J1c, CTOD, da/dN, △Kth of the sample and draw S-N curves. It is particularly suitable for testing the fatigue characteristics or fatigue life of various low-load and lightweight components under alternating forces, as well as conducting pre-crack and crack propagation tests. It can perform symmetrical fatigue tests, asymmetric fatigue tests, unidirectional tension or compression fatigue tests, programmed (block spectrum) fatigue tests, waveform composite (modulation) controlled fatigue tests, and can be equipped with corresponding fixtures (such as CT tensile, MT tensile, three-point bending (SEB), four-point bending, etc.). Meanwhile, the equipment supports the configuration of accessories such as high-temperature furnaces, high and low temperature chambers, and corrosion chambers, which can complete fatigue tests in complex environments. It can provide key data support for the reliability design, life prediction and quality control of materials and components.
Standards
ISO 4965-1-2012, ISO 12315-2021, ISO 1099-2017, ISO 15630-1-2010, ISO 15630-3-2010ASTM D3479-2023, ASTM D6879-2023, ASTM E467-2008, ASTM E1012-19, ASTM E606-2021, ASTM E1820-2024, ASTM E399-2022, ASTM E647-2005, ASTM E466-2021, ASTM F1717-2011, ASTM F1800-2004, ASTM F1440-1992FeaturesTechnical Parameter*View all to the rightModel
HDT503A
HDT104A
HDT254A
Force capacity (kN)
(rated dynamic force)
5
10
25
Force measurement range (kN)
(2%~100%FS)
0.1~5
0.2~10
0.5~25
Static force accuracy
±0.5%
±0.5%
±0.5%
Dynamic force accuracy
±2%
±2%
±2%
Actuator dynamic stroke (mm)
100
100
100
Displacement range (mm)
0~100 (±50)
0~100 (±50)
0~100 (±50)
Displacement resolution (mm)
0.001
0.001
0.001
Displacement accuracy
≤3mm, 0.015mm
>3mm, ±0.5%FS
≤3mm, 0.015mm
>3mm, ±0.5%FS
≤3mm, 0.015mm
>3mm, ±0.5%FS
Test frequency (Hz, Sine wave)
0.01~60
0.01~60
0.01~60
Minimum vertical space A (mm)
157~827
157~827
157~827
Base height B (mm)
230
230
230
Column spacing C (mm)
460
460
460
Column diameter D (mm)
70
70
70
Base width E (mm)
630
630
630
Work surface depth F (mm)
500
500
500
Height to actuator top G (mm)
1150~1820
1150~1820
1150~1820
Overall height H (mm)
2100
2100
2100
Height of alignment fixture plus load cell (mm)
123
123
123
Base depth K (mm)
574
574
574
Frame stiffness (N/m)
3.5×108
3.5×108
3.5×108
Machine weight (kg)
260
260
260
Alignment
5%
5%
5%
Microcomputer-controlled electronic universal testing machine - TSE seriesContact Us
To ensure that you have access to the information you need, please fill in and verify your information accurately. We will contact you via phone and text message.
Name*CompanyPhone/Email*Address*I understand and agree to the use and transfer of my personal information in accordance with the Privacy Policy.
