-
Servo hydraulic dynamic testing machine
Servohydraulic, HDT-A, 25kN~500kN
HDT-A Actuator lower
It is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used to test the static and dynamic mechanical properties of various alloy materials, engineering plastics, composite materials, elastomer materials and components.
Consult NowApplicationsStandardsFeaturesTechnical ParameterOptional AccessoriesProduct RecommendationApplicationsIt is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used to test the static and dynamic mechanical properties of various alloy materials, engineering plastics, composite materials, elastomer materials and components. The fatigue life, K1c, J1c, CTOD, da/dN, △Kth of the sample can be measured and the S-N curve can be plotted. It is particularly suitable for testing the fatigue characteristics or fatigue life of various standard samples (such as plates and bars), components (such as steel bars, gears, crankshafts, threaded fasteners, chains, connecting rods, operating joints, connecting parts and moving pair components, etc.) under alternating forces. It can perform symmetrical fatigue tests, asymmetric fatigue tests, unidirectional tension or compression fatigue tests, programmed (block spectrum) fatigue tests, and waveform composite (modulation) control fatigue tests. Corresponding fixtures can be configured (such as CT tensile, MT tensile, three-point bending (SEB), four-point bending, etc.). Meanwhile, the equipment supports the configuration of accessories such as high-temperature furnaces, high and low temperature chambers, and corrosion chambers, which can complete fatigue tests in complex environments. It can provide key data support for the reliability design, life prediction and quality control of materials and components.
Standards
ISO 4965-1-2012, ISO 1099-2017, ISO 15630-1-2010, ISO 15630-3-2010, ISO 12135-2021ASTM E467-2021, ASTM E1012-2019, ASTM E606-2021, ASTM E1820-2024, ASTM E399-2022, ASTM E647-2005, ASTM D3479-2023, ASTM D6873-2023, ASTM E466-2021FeaturesTechnical Parameter*View all to the rightModel
HDT254A
HDT504A
HDT105A
HDT255A
HDT505A
Force capacity (kN)
(rated dynamic force)
25
50
100
250
500
Force measurement range (kN)
(2%~100%FS)
0.5~25
1~50
2~100
5~250
10~500
Static force accuracy
±0.5%
Dynamic force accuracy
±1.5%
Actuator stroke (mm)
150
Displacement range (mm)
0~150(±75)
Displacement resolution (mm)
0.001
Displacement accuracy
≤3mm, 0.015mm
>3mm, ±0.5%FS
Test frequency (Hz, Sine wave)
0.01~60
Standard frame, A(mm)
150~1520
150~1520
150~1520
250~1620
380~2050
Extended frame, A(mm)
550~1920
550~1920
550~1920
650~2020
/
T-slot table height, B(mm)
135
135
135
165
220
Distance between columns
C(mm)
550
550
550
650
760
Column diameter, D(mm)
80
80
80
80
100
Machine width E(mm)
970
970
970
1070
1300
T-slot table length, F(mm)
800
800
800
900
1100
T-slot table width, G(mm)
800
800
800
900
1100
Standard frame height, H(mm)
2910
2910
2910
3170
3990
Extended frame height, H(mm)
3410
3410
3410
3570
/
Standard frame height, I(mm)
2105
2105
2105
2620
3010
Extended frame height, I(mm)
2595
2595
2595
2710
/
Load cell height, J(mm)①
180
180
180
237
307
T-slot distance, K(mm)
100
100
100
125
150
T-slot distance, L(mm)
200
200
200
250
300
T-slot distance, M(mm)
0
0
0
160
240
T-slot bolt
M16
M16
M16
M20
M20
Stiffness, N/m
5×108
5×108
5×108
5.4×108
7.8×108
Standard frame weight, (kg)②
1150
1150
1200
1900
4050
Extended frame weight (kg)③
1190
1190
1240
1940
/
Support weight
73
73
73
103
/
Optional Accessories
Microcomputer-controlled electronic universal testing machine - TSE seriesContact Us
To ensure that you have access to the information you need, please fill in and verify your information accurately. We will contact you via phone and text message.
Name*CompanyPhone/Email*Address*I understand and agree to the use and transfer of my personal information in accordance with the Privacy Policy.
