-
Servo hydraulic dynamic testing machine
Servohydraulic, HDT-B, 5kN~500kN
HDT Series Type B
It is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used to test the static and dynamic mechanical properties of various alloy materials, engineering plastics, composite materials, elastomer materials and components.
Consult NowApplicationStandardsFeaturesTechnical ParameterOptional AccessoriesProduct RecommendationApplicationIt is mainly applied in the fields of quality inspection (QC), quality analysis (QA) and research and development (R&D), and is used to test the static and dynamic mechanical properties of various alloy materials, engineering plastics, composite materials, elastomer materials and components. The fatigue life, K1c, J1c, CTOD, da/dN, △Kth of the sample can be measured and the S-N curve can be plotted. It is particularly suitable for testing the fatigue characteristics or fatigue life of various standard samples (such as plates and bars), components (such as steel bars, gears, crankshafts, threaded fasteners, chains, connecting rods, operating joints, connecting parts and moving pair components, etc.) under alternating forces. It can perform symmetrical fatigue tests, asymmetric fatigue tests, unidirectional tension or compression fatigue tests, programmed (block spectrum) fatigue tests, and waveform composite (modulation) control fatigue tests. Corresponding fixtures can be configured (such as CT tensile, MT tensile, three-point bending (SEB), four-point bending, etc.). Meanwhile, the equipment supports the configuration of accessories such as high-temperature furnaces, high and low temperature chambers, and corrosion chambers, which can complete fatigue tests in complex environments. It can provide key data support for the reliability design, life prediction and quality control of materials and components.
Standards
ISO 4965-1-2012, ISO 12135-2021, ISO 1099-2017, ISO15630-3-2010ASTM E467-2021, ASTM E1012-2019, ASTM D3479-2023, ASTM D6873-2023, ASTM E606-2021, ASTM E1820-2024, ASTM E399-2022, ASTM E647-2005, ASTM E466-2021FeaturesTechnical Parameter*View all to the rightModel
HDT503B
HDT104B
HDT254B
HDT504B
HDT105B
HDT255B
HDT505B
Force capacity (kN)
(rated dynamic force)
5
10
25
50
100
250
500
Force measurement range (kN) (2%~100%FS)
0.1～5
0.2～10
0.5~25
1~50
2~100
5~250
10~500
Static force accuracy
±0.5%
Dynamic force accuracy
±2%
Actuator stroke (mm)
150
Displacement range (mm)
0~150(±75)
Displacement resolution (mm)
0.001
Displacement accuracy
≤3mm, 0.015mm, >3mm ±0.5% of reading
Test frequency (Hz, Sine wave)
0.01~60
Minimum vertical space A (mm)
140~1285
140~1285
230~1620
420~2080
Minimum vertical space with extended columns A(mm)
435~1760
435~1760
700~2120
/
Base height B (mm)
950
950
950
970
Column spacing C (mm)
550
550
650
760
Column diameter D (mm)
80
80
80
100
Machine width E (mm)
1050
1050
1155
1355
Machine depth F (mm)
680
680
740
895
Machine height H (mm)
2760
2760
3215
3875
Height of machine with extended columns H (mm)
3250
3250
3715
/
Frame stiffness (N/m)
5×108
5×108
5.4×108
7.8×108
Machine weight (kg)
760
800
1140
2080
Machine weight with extended columns (kg)
800
840
1200
/
Alignment
5%
5%
5%
5%
Microcomputer-controlled electronic universal testing machine - TSE seriesContact Us
To ensure that you have access to the information you need, please fill in and verify your information accurately. We will contact you via phone and text message.
Name*CompanyPhone/Email*Address*I understand and agree to the use and transfer of my personal information in accordance with the Privacy Policy.
